2000 Toyota Yaris

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Headlamp lens slightly defective both worn (4.1.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake performance not tested (1.2.1 (g))

Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Hydraulic brake cylinder damaged and braking performance affected (1.1.16 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Headlamp lens slightly defective both worn (4.1.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security all prescribed areas corroded (6.2.2 (d) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush of arm (5.3.4 (a) (i))

Nearside Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill rear to front (6.2.2 (d) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush of arm (5.3.4 (a) (i))

Offside Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill rear to front (6.2.2 (d) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Headlamp deteriorated but light output not reduced Both (1.7.5a)

Front Tyre worn close to the legal limit Both (4.1.E.1)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement Both (2.4.G.2)

Offside Rear wheel bearing has slight play (2.6.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear coil spring broken (2.4.C.1a)

Parking brake lever has no reserve travel (3.1.6b)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear coil spring broken (2.4.C.1a)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)