2000 Honda Cr-v

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component pin or bush slightly worn Trailing Arm Bush (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component pin or bush slightly worn Trailing Arm Bush (5.3.4 (a) (i))

Oil leak, but not excessive Transmission drive shaft seals (8.4.1 (a) (i))

Nearside Rear Brake pipe excessively corroded Pipe going to brake from flexible hose (1.1.11 (c))

Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Brake pipe excessively corroded Pipe going to brake from flexible hose (1.1.11 (c))

Nearside None obligatory mirror damaged

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component pin or bush slightly worn Trailing Arm Bush (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component pin or bush slightly worn Trailing Arm Bush (5.3.4 (a) (i))

Oil leak, but not excessive Transmission drive shaft seals (8.4.1 (a) (i))

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Nearside Rear Anti-roll bar has slight play in a pin/bush D-bush (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear tyre worn on inner and outer shoulders

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear tyre worn on inner shoulder

Rear fog lamp damaged, but still visible from a reasonable distance (1.3.2d)

Battery insecure (1.9.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Nearside Rear Anti-roll bar has slight play in a pin/bush D-bush (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear tyre worn on inner and outer shoulders

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too high (1.8)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear tyre worn on inner shoulder

Rear fog lamp damaged, but still visible from a reasonable distance (1.3.2d)

Brake pipe slightly corroded to rear wheels both (3.6.B.2c)

Nearside Front Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Brake pipe slightly corroded to rear wheels both (3.6.B.2c)

front number plate damaged

Bind to o/s/f brake

Exhaust system starting to corrode

Front reg plate not fully secure

Offside Stop lamp not working (1.2.1b)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear fog lamp emits a light other than red (1.3.2e)

Bind to o/s/f brake

Exhaust system starting to corrode

Front reg plate not fully secure

Rear fog light lense

Nearside Front coil spring fractured (2.4.C.1a)

Nearside Stop lamp not working (1.2.1b)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Rear fog light lense

Nearside Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear fog lamp damaged, but still visible from a reasonable distance (1.3.2d)

Offside Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)