2000 Toyota Yaris

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

both front drop link rubbers cracking

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

corrosion forming on inner and outer sills

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear light lens damaged

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Engine mill light on

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. parking brake (3.7.B.5b)

both front tyres worn on outer edge

fuel filler pipes corroded

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Engine mill light on

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. parking brake (3.7.B.5b)

both front tyres worn on outer edge

fuel filler pipes corroded

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust system not adequately supported (7.1.1)

Nearside Headlamp aim too high adjuster not working (1.8)

Offside Headlamp aim too high adjuster not working (1.8)

Nearside Exhaust has a minor leak of exhaust gases silencer pip holes (7.1.2)

Offside Rear nail

Rear Exhaust has a minor leak of exhaust gases joint (7.1.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

engine malfunction light on

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Offside Rear coil spring broken (2.4.C.1a)

front exhaust hangers corroded thin

headlamp beam images getting feint

rear exhaust heat shield loose

front exhaust hangers corroded thin

headlamp beam images getting feint

rear exhaust heat shield loose

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Both front tyres worn low on inside edges.