2000 Ford Mondeo

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Headlamp aim too high (1.8)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too high (1.8)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake lever has no reserve travel (3.1.6b)

rear brake application uneven (3.7.B.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

fuel tank obscuring metal brake pipes unable to carry out full inspection

light output slightly reduced on both headlamps

rear silencer deteriorated

vehicle underside covered in heavy wet mud obscuring testable items

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

advise rear bumper slightly damaged

Nail in offside rear tyre

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

corrosion to parts of exhaust system

rear wiper blade split

slight corrosion to floor

Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

corrosion to parts of exhaust system

rear wiper blade split

slight corrosion to floor

corrosion to rear exhaust box

Nearside Headlamp aim too low (1.8)

Nearside Rear Anti-roll bar linkage fractured (2.4.G.1)

Offside Headlamp aim too low and too far to the left. (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Offside rear brake binding (3.7.B.1)

rear brake application uneven (3.7.B.2)

rear brakes release unevenly (3.7.B.4)

corrosion to rear exhaust box

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Brakes imbalanced across an axle (3.7.B.5b)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Rear Registration plate lamp not working (1.1.C.1d)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)