2000 Toyota MR2

Front Suspension component mounting prescribed area is corroded but not considered excessive mounting points corroded and weakened.(on limit) (5.3.6 (a) (i))

all rear suspension components heavily corroded

front suspension arms corroded and weakened

parking brake lever travel high.(on limit)

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Front Coil spring corroded N/S/F & O/S/F (5.3.1 (b) (i))

Front N/S/F & O/S/F SHOCK ABSORBERS CORRODED

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened on limit (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Macpherson strut corroded but not seriously weakened on limit (5.3.3 (b) (i))

Offside Front Macpherson strut corroded but not seriously weakened on limit (5.3.3 (b) (i))

heavy corrosion on under side floor and suspension components

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Suspension arm insecurely attached bolt not tightened (5.3.3 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened on limit (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Macpherson strut corroded but not seriously weakened on limit (5.3.3 (b) (i))

Offside Front Macpherson strut corroded but not seriously weakened on limit (5.3.3 (b) (i))

heavy corrosion on under side floor and suspension components

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

heavy corrosion on underside of body and front and rear suspension components

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

heavy corrosion on underside of body and front and rear suspension components

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. weak + slight bind (3.7.B.6b)

Parking brake lever has no reserve travel (3.1.6b)

Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear subframe (6.1.B.2)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside rear brake juddering severely (3.7.A.5b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Rear brake disc slightly pitted (3.5.1h)