2000 Peugeot 106

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (5.3.6 (a) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Brake pedal anti-slip provision missing (1.1.2 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Lower Suspension arm ball joint excessively worn hub (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (5.3.6 (a) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Position lamp not working both (4.2.1 (a) (ii))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Headlamp aim projected beam image is obviously incorrect both front (4.1.2 (c))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired boot (5.3.6 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of arch (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of arch (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top mount/under bonnet (5.3.6 (a) (i))

Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top mount (5.3.6 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Position lamp not working both (4.2.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Driver's seat insecure bolt missing (6.2.5 (a) (ii)) DANGEROUS

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Front Tyre worn close to legal limit/worn on edge on the limit (5.2.3 (e))

Offside Rear tyre deteriorated

Oil leak, but not excessive (8.4.1 (a) (i))

sill covers fitted

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Inner Suspension component mounting repair covered in underseal arch and inner sill (5.3.6 (a) (i))

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing badly deteriorated on inner sidewall (5.2.3 (d) (ii))

Offside Rear Inner Suspension component mounting repair covered in underseal arch and inner sill (5.3.6 (a) (i))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

corrosion nearside front and offside front inner and outer sills (damaged)

unable to tilt passenger seat

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Inner Suspension component mounting repair covered in underseal arch and inner sill (5.3.6 (a) (i))

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing badly deteriorated on inner sidewall (5.2.3 (d) (ii))

Offside Rear Inner Suspension component mounting repair covered in underseal arch and inner sill (5.3.6 (a) (i))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

corrosion nearside front and offside front inner and outer sills (damaged)

unable to tilt passenger seat

Battery insecure (1.9.1)

Central Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded inner/sill floor area (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is inadequately repaired floor area above and underneath has corrosion and incomplete welding (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill near axle mount (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded inner sill/floor area (2.4.A.3)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Subframe mounting prescribed area is inadequately repaired floor area above and underneath has corrosion and covered with underseal/sealant (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill/inner arch near axle mount behind fuel tank (2.4.A.3)

Parking brake lever has no reserve travel (3.1.6b)

Brake pedal spongy no brakes (3.3.B.1b) DANGEROUS

Brake performance not tested brakes not working (3.7.A.1) DANGEROUS

Nearside Front Lower Suspension arm has excessive play in a ball joint possible worn hub (2.4.G.2) DANGEROUS

Nearside Rear Nail in tyre ()

Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

offside front top strut mount has slight corrosion

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Suspension arm has excessive play in a ball joint possibly hub worn (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded inner/outer sill (2.4.A.3)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is excessively corroded floor/inner arch (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded floor/inner arch (2.4.A.3)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Subframe mounting prescribed area is excessively corroded floor/inner arch (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded floor/inner arch (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Nail in tyre in shoulder ()

Nearside Rear Tyre worn close to the legal limit and very low on pressure (4.1.E.1)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner/outer sill and floor (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Central Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust system not adequately supported rubber mounts missing (7.1.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

nearside and offside front sills corroded

water leak

Nail in offside rear tyre

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Driver's seat insecure (6.2.A.1)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake lever insecure (3.1.3b)

Registration plate lamp not working (1.1.C.1d)

Nail in offside rear tyre

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Nearside Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Brake cable insecure (3.5.1d)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Steering rack gaiter missing (2.2.D.2d)

Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2) DANGEROUS

Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Tyre worn close to the legal limit (4.1.E.1)