MOT Status
ExpiredMileage
107,528 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pipe corroded, covered in grease or other material and rear (1.1.11 (c))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Fuel cap/sealing device ineffective (6.1.3 (b) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Front Brake pipe corroded, covered in grease or other material and rear (1.1.11 (c))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
corrosion underside
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
chassis under sealed
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
chassis under sealed
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
chassis has been under sealed
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
chassis has been under sealed
Under body has been under sealed.
slight surface corrosion.
Brake pipe excessively corroded main front to rear (1.1.11 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Fuel pipe leaking center of vehicle (6.1.3 (b) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Brake pipe excessively corroded to hose (1.1.11 (c))
Nearside Rear Position lamp adversely affected by the operation of another lamp when brakes are applied (4.2.3 (c))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Brake pipe excessively corroded to hose (1.1.11 (c))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive sub-frame mounting areas (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material to hose (1.1.11 (c))
Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting repair covered in underseal under sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive trailing arm mounting area (5.3.6 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal under sill (5.3.6 (a) (i))
Oil leak, but not excessive engine sump porous (8.4.1 (a) (i))
Oil leak, but not excessive from transmission (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
rear exhaust clamp corroded
signs o/s rear brake binding but free during test
support bar under rear sub-frame corroded
unable to check outer sills due to plastic covers fitted
Brake pipe slightly corroded main metal brake pipes x2 front to rear hoses (3.6.B.2c)
Exhaust has a minor leak of exhaust gases front down pipe joint (7.1.2)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
engine management light on
n/s front brake binding slightly
o/s rear parking brake performance low
oil leak
rear exhaust clamp corroded
sump corroded
unable to check main metal brake pipes fully due to plastic coverings
unable to check outer sills due to plastic covers fitted
Nearside Rear Registration plate lamp not fitted missing (1.1.C.1b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill/arch infront of wheel (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded sill/arch infront of wheel (2.4.A.3)
Offside Rear Registration plate lamp insecure (1.1.C.1c)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis section (2.4.A.3)
Offside Rear position lamp(s) not working (1.1.A.3b)
Brake pipe slightly corroded main metal brake pipes x2 front to rear hoses (3.6.B.2c)
Exhaust has a minor leak of exhaust gases front down pipe joint (7.1.2)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
engine management light on
n/s front brake binding slightly
o/s rear parking brake performance low
oil leak
rear exhaust clamp corroded
sump corroded
unable to check outer sills due to plastic covers fitted
Brake pipe slightly corroded all rear (3.6.B.2c)
Brake pipe slightly corroded main (3.6.B.2c)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Rear brake back plate rusty
Parking brake lever has little reserve travel (3.1.6b)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
all front suspention components rusty
all rear suspention components rusty
both front antiroll bar link covers perished
engine managment light on
fuel pipes rusty
unable to check brake pipes fully due to plastic covering
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Brake pipe slightly corroded all rear (3.6.B.2c)
Brake pipe slightly corroded main (3.6.B.2c)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Rear brake back plate rusty
Parking brake lever has little reserve travel (3.1.6b)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
all front suspention components rusty
all rear suspention components rusty
both front antiroll bar link covers perished
engine managment light on
fuel pipes rusty
unable to check brake pipes fully due to plastic covering
Nearside Front Tyre worn close to the legal limit and worn on edges (4.1.E.1)
Nearside Rear Brake pipe slightly corroded to hose (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit worn on inner edge (4.1.E.1)
Offside Front Tyre worn close to the legal limit and worn on edges (4.1.E.1)
Offside Rear Brake pipe slightly corroded to hose (3.6.B.2c)
engine management light on
front and rear suspension components surface corrosion
fuel pipes rusty
o/s front brake back plate corroded
o/s rear chassis rusty and thin
Front Bootlid cannot be secured in the closed position bonnet (6.4.1)
Nearside Front Tyre worn close to the legal limit and worn on edges (4.1.E.1)
Nearside Rear Brake pipe slightly corroded to hose (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit worn on inner edge (4.1.E.1)
Offside Front Tyre worn close to the legal limit and worn on edges (4.1.E.1)
Offside Rear Brake pipe slightly corroded to hose (3.6.B.2c)
engine management light on
front and rear suspension components surface corrosion
fuel pipes rusty
o/s front brake back plate corroded
o/s rear chassis rusty and thin
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
engine management light on
heavy surface corrosion on front subrame and all suspension components
heavy surface corrosion on fuel lines
o/s rear chassis section infront of wheel surface corrosion
oil leak
slight dampness around o/s front steering rack
Brake pipe slightly corroded (3.6.B.2c)
engine managment light on
heavy surface corrosion on front and rear suspention areas
n/s/r tyre wearing uneven
same advisories as test number 485539313285
Exhaust system not adequately supported (7.1.1)
Nearside Brake pipe slightly corroded (3.6.B.2c)
heavy flakey rust on all suspension components
heavy wear on front brake discs
slight brake judder in both front brakes
unable to check metal brake pipes fully due to protective coverings
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
front and rear exhaust joints rusty
rear service and park brake performance low
surface rust on all brake lines
surface rust on fuel lines
OSR Tyre Wearing close to limit on inner edge
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
OSR Tyre Wearing close to limit on inner edge
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Brake pad(s) wearing thin (3.5.1g)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
o/s/r wheel binding slightly
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
o/s wiper blade torn slightly
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Honda Integra?
Based on 52,340 MOT tests across 5,513 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
W282 TBR is a 2000 Honda Integra in White with a 1,797cc petrol engine. This vehicle has been through 28 MOT tests with a personal pass rate of 64.3%.
Across all 2000 Honda Integra models, the average MOT pass rate is 75.0% with a typical mileage of 87,236 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Integra fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,913 recorded failures. If you're considering buying W282 TBR, it's worth having these areas checked by a mechanic before committing.
The Honda Integra typically stays on UK roads for around 39 years. At 26 years old, this Honda Integra is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of W282 TBR?
You can check the full history of W282 TBR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was W282 TBR registered?
W282 TBR is a 2000 Honda Integra, first registered on 31 August 2000.
Is W282 TBR safe to buy?
The MOT history for W282 TBR shows 28 tests with a 64.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does W282 TBR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on W282 TBR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.