2000 Ford Mondeo

Offside Rear Upper Vehicle structure is corroded but structural rigidity is not significantly reduced Rear chassis behind rear bumper corroded (6.1.1 (c) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing Slight damage to rim protector (5.2.3 (d) (ii))

Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sill (6.2.2 (d) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Arm front bush deterated slightly (5.3.4 (a) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

vehicle heavily undersealed

Offside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Offside Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

Suspension component mounting prescribed area is excessively corroded n/s and o/s front floor (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded n/s and o/s rear floor (2.4.A.3)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front registration plate background overprinted or shadowed with text (6.3.1e)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Rear registration plate background overprinted or shadowed with text (6.3.1e)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Brake pipe excessively corroded (3.6.B.2c)

Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Anti-roll bar linkage fractured (2.4.G.1)

Nearside Stop lamp not working (1.2.1b)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Front registration plate background overprinted or shadowed with text (6.3.1e)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate background overprinted or shadowed with text (6.3.1e)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Brake pipe slightly corroded (3.6.B.2c)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS