2000 Yamaha -

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Direction indicator lens defective such that the emitted light is adversely affected Both front indicators affected (4.4.1 (b) (ii))

Exhaust noisy (7.1.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Direction indicator incorrect colour showing blue light on rear of indicator (1.5.1b)

Front Brake fluid reservoir leaking hydraulic fluid (3.2.B1e)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear torque arm to calliper split pin missing (6.2.1h)

Rear Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Headlamp aim too high auxiliary light fitted wired to dipped beam to high an poorly mounted (1.6) DANGEROUS

Exhaust noisy (7.1.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Front slight cracks round rim

Rear crack both sides

Brake performance not tested (3.3)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Front Brake lever has inadequate reserve travel (3.1.3b)