MOT Status
ValidMileage
111,394 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
All welding under sealed
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
EML light on
Heat shield on cat lose
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Corroded at rear
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Suspension arm pin or bush excessively worn Trailing arm (5.3.4 (a) (i))
Nearside Side repeater not working (4.4.1 (a) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Corroded at rear
Nearside Headlamp aim too low (4.1.2 (a))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive underneath battery tray (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near anti rollbar mounting (5.3.6 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive underneath battery tray (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive Battery tray (5.3.6 (a) (i))
Nearside Rear Light lens damaged
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive Battery tray (5.3.6 (a) (i))
Nearside Rear Light lens damaged
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Battery tray corroded
Nearside Rear Light lens damaged
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Battery tray corroded
Nearside Rear Light lens damaged
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Stop lamp not working (1.2.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Brake pad(s) wearing thin (3.5.1g)
Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Honda Cr-v?
Based on 4,177,643 MOT tests across 304,403 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
W304 WTA is a 2000 Honda Cr-v in Gold with a 1,973cc petrol engine. This vehicle has been through 32 MOT tests with a personal pass rate of 65.6%.
Across all 2000 Honda Cr-v models, the average MOT pass rate is 70.9% with a typical mileage of 96,500 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Cr-v fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 62,925 recorded failures. If you're considering buying W304 WTA, it's worth having these areas checked by a mechanic before committing.
The Honda Cr-v typically stays on UK roads for around 29 years. At 26 years old, this Honda Cr-v is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of W304 WTA?
You can check the full history of W304 WTA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was W304 WTA registered?
W304 WTA is a 2000 Honda Cr-v, first registered on 31 December 2000.
Is W304 WTA safe to buy?
The MOT history for W304 WTA shows 32 tests with a 65.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does W304 WTA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on W304 WTA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.