2000 Honda Integra

Brake disc worn, pitted or scored, but not seriously weakened All (1.1.14 (a) (ii))

Tyre slightly damaged/cracking or perishing All (5.2.3 (d) (ii))

Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))

Tyre slightly damaged/cracking or perishing all (5.2.3 (d) (ii))

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Horn not working (1.6.2a)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front front brake binding (3.7.B.1)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear Exhaust has a major leak of exhaust gases Joint (7.1.2)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Body has slight corrosion Members andunderneath (6.1.B.2)

Covers fitted over sills

Body has slight corrosion Covers over outer sills (6.1.B.2)

Central Exhaust has a minor leak of exhaust gases (7.1.2)

Front Anti-roll bar linkage corroded but not seriously weakened (2.4.G.1)

Front Body has slight corrosion Member (6.1.B.2)

Front Brake pad(s) wearing thin (3.5.1g)

Inner Body has slight corrosion Sills (6.1.B.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

coil spring corroded All 4 (2.4.C.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear rear brake binding (3.7.B.1)

Body has slight corrosion Covers over outer sills (6.1.B.2)

Central Exhaust has a minor leak of exhaust gases (7.1.2)

Front Anti-roll bar linkage corroded but not seriously weakened (2.4.G.1)

Front Body has slight corrosion Member (6.1.B.2)

Front Brake pad(s) wearing thin (3.5.1g)

Inner Body has slight corrosion Sills (6.1.B.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

coil spring corroded All 4 (2.4.C.1b)

Inner Body has slight corrosion sills (6.1.B.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

covers over outer sills

Nearside Front front brake binding (3.7.B.1)

Offside Headlamp has a product on the light source so that the light output is severely reduced (1.7.5a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Inner Body has slight corrosion sills (6.1.B.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

covers over outer sills

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Registration plate lamp insecure (1.1.C.1c)

both exhaust joins are deteriorated

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both exhaust joins are deteriorated

Body has slight corrosion (6.1.B.2)

Inner Body has slight corrosion (6.1.B.2)

Rear Brake pad(s) wearing thin (3.5.1g)

covers over the outer sills

Rear Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

bothsides sill cover fitted

Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

bothsides sill cover fitted

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Both front tyres wearing thin on inner edges

Rear nearside brake sticking slightly

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)