2000 Honda Accord

Headlamp light source and lamp not compatible offside and nearside (4.1.4 (c))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Anti-roll bar linkage ball joint has slight play offsider and nearside (5.3.4 (a) (i))

Front Upper Suspension arm ball joint dust cover severely deteriorated offside and nearside (5.3.4 (b) (i))

Rear Exhaust mounting defective flanges corroding away (6.1.2 (a))

Rear Service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.2.2 (a) (i))

Rear Upper Suspension arm ball joint has slight play offside and nearside (5.3.4 (a) (i))

vehicle has a recall

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

exhaust corroded

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

exhaust corroded

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive SILL (5.3.6 (a) (i))

exhaust corroded

Exhaust system corroded

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Exhaust corroded

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Body sill , jacking point. (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))

Rear Exhaust flanges, nuts and bolts badly corroded but secure

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Both rear tyres badly cracked (STRONG ADVICE)

Nearside Rear Nail in tyre ()

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pads wearing thin.

O/S/Front Tyre Badly Worn on inner edge

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

both rear tyres started to crack

front number plate cracked

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

both rear tyres started to crack

front number plate cracked

Front Brake pad(s) wearing thin (3.5.1g)