2000 Peugeot Boxer

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Inner Sill corroded and holed

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits .99 (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds default limits 4,2 (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits 388 (8.2.1.2 (a))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Play in steering rack inner joint(s) o/s and n/s

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust mounting defective Rubbers perishing (6.1.2 (a))

Brake pipe corroded, covered in grease or other material All (1.1.11 (c))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Horn not working (7.7 (a))

Nearside Body panel corroded and likely to cause injury (6.2.1 (a) (i))

Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Body panel corroded and likely to cause injury (6.2.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Service brake excessively binding (1.2.1 (f))

Towbar component excessively corroded (6.1.6 (a))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ( outer sill ) (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive ( o\s sill and under side of sill) (5.3.6 (a) (i))

slight corrosion front cross member and n\s and o\s rear sills and under side of sills

front o\s tyre

slight corrosion front cross member

cracks in tread o/s/f tyre

o/s lower sill step corroded

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Suspension component mounting prescribed area is excessively corroded outrigger (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded frame corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

cracks in tread o/s/f tyre

o/s lower sill step corroded

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Towbar component slightly corroded (6.6.1)

Towbar component slightly corroded (6.6.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Exhaust system not adequately supported (7.1.1)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Towbar component slightly corroded (6.6.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

both rear tyres perishing

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Horn not working (1.6.2a)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

baffles loose in centre silencer advise replacement