MOT Status
ExpiredMileage
141,113 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner arch holed (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded under chassis (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front coil spring broken (2.4.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded under chassis (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Exhaust system not adequately supported silencer loose (7.1.1)
Access panel cannot be secured in the closed position bonnet (6.4.1) DANGEROUS
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis collapsed (6.1.B.2) DANGEROUS
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit starting to go out of shape (4.1.E.1)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear Vehicle structure has slight corrosion (6.1.B.2)
Offside Rear coil spring corroded (2.4.C.1b)
Offside floor to under sill rusty
cross member rusty
Brake pipe slightly corroded (3.6.B.2c)
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Sub-frame slightly distorted (2.4.G.1)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake pipe slightly corroded (3.6.B.2c)
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Sub-frame slightly distorted (2.4.G.1)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Horn not working (1.6.2a)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too low (1.8)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside rear brake binding (3.7.B.1)
Offside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Headlamp aim too low (1.8)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed (6.1.B.2)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2) DANGEROUS
Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)
Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Vehicle structure has slight corrosion chassis rusty (6.1.B.2)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Brake pipe slightly corroded front to rear (3.6.B.2c)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
offside rear chassi leg corroded and holed but outside teat area
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Suspension arm corroded and seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
offside rear chassi leg corroded and holed but outside teat area
Brake pipe slightly corroded (3.6.B.2c)
Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Outer Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
chips to windscreen
holed corrosion to offside rear chassis rail outside of prescribed area
rear inner sills and chassis rails slightly corroded
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
nearside rear tyre and wheel slightly out of shape
offside rear chassis has a small hole but near any prescribed areas
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Front Brake pipe excessively corroded (3.6.B.2c)
Offside Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda Demio?
Based on 136,409 MOT tests across 10,090 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
W32 XAV is a 2000 Mazda Demio in Silver with a 1,300cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 66.7%.
Across all 2000 Mazda Demio models, the average MOT pass rate is 72.3% with a typical mileage of 66,328 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Demio fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 7,070 recorded failures. If you're considering buying W32 XAV, it's worth having these areas checked by a mechanic before committing.
The Mazda Demio typically stays on UK roads for around 28 years. At 26 years old, this Mazda Demio is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of W32 XAV?
You can check the full history of W32 XAV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was W32 XAV registered?
W32 XAV is a 2000 Mazda Demio, first registered on 8 March 2000.
Is W32 XAV safe to buy?
The MOT history for W32 XAV shows 18 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does W32 XAV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on W32 XAV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.