2000 Suzuki VL125

Exhaust noisy (8.1.1 (a))

Exhaust slightly loose (6.1.2 (a))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Direction indicator not working (4.4.1 (a) (ii))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Exhaust slightly loose (6.1.2 (a))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust noisy (7.1.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Roller brake test indicates a sticking brake (3.3.A1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Front wheel bearings are slightly rough (2.3.5b)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Steering movement slightly 'notchy' (2.2.1b)

Wheel alignment slightly misaligned. (2.5.1)

Front Steering movement slightly rough. (2.2.1b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

bar ends missing both sides

chain guard missing

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Rear suspension bearing has slight free play (2.4.A2a(i))

front tyre heavily cracked on side walls

Chain guard missing

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

Horn not working (1.7.3a)

Drive chain excessively tight (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))