2000 Ford Mondeo

corrosion on rear wheel arches

Driver's seat cannot be secured in the upright position. (6.2.A.2)

Nearside Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage insecure (2.4.G.1)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Brake pipe slightly corroded (3.6.B.2c)

corrosion on rear wheel arches and sill panels

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp aim too high (1.8)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

corrosion on rear wheel arches and sill panels

Brake pipe slightly corroded (3.6.B.2c)

Emissions not tested (7.0)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Headlamp aim too low (1.8)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Brake pipe slightly corroded (3.6.B.2c)

Front bumper insecure

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Shock absorber has negligible damping effect (2.7.5)

Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Shock absorber has negligible damping effect (2.7.5)

Offside Rear Anti-roll bar linkage fractured (2.4.G.1)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front coil spring fractured (2.4.C.1a)

Nearside rear brake binding (3.7.B.1)

Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Registration plate lamp not working (1.1.5c)

Offside Headlamp aim too high (1.8)

Offside Registration plate lamp not working (1.1.5c)