2000 Suzuki GSF1200

Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Registration plate does not conform to the specified requirements (0.1 (d))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Headlamp aim too high (4.1.2 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Front Headlamp aim too high (4.1.2 (a))

Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition silencer baffle missing (8.1.1 (a))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Rear Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Exhaust markings indicating not for road use or similar wording (7.1.4)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Head bearings may require adjustment

Head bearings may require adjustment

Headlamp aim too high (1.6)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust noisy (7.1.2)

Steering movement slightly 'notchy' (2.2.1a)

Steering movement slightly stiff (2.2.1a)

number plate starting to delaminate

oil cooler pipe melting on header

Exhaust markings indicating not for road use or similar wording (7.1.4)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Steering movement slightly 'notchy' (2.2.1a)

Steering movement slightly stiff (2.2.1a)

number plate starting to delaminate

oil cooler pipe melting on header

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain slightly loose (6.2.1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))