2000 Land Rover Discovery

Front Lower Shock absorbers has a slightly worn bush both sides (5.3.2 (c))

rear propshaft donut perishing

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view chips in windscreen (3.2 (a) (i))

Offside Front Seat belt not functioning as intended (7.1.2 (c))

Offside Rear Bumper damaged and likely to cause injury when grazed or contacted repaired using tape (6.1.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view chips in windscreen (3.2 (a) (i))

Advanced corrosion to osf and both centre body mounts.

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i))

Advanced corrosion to osf and both centre body mounts.

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Advanced corrosion to both middle body mountings.

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Advanced corrosion to both middle body mountings.

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim too low (4.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

general corrosion under vehicle

Nearside Headlamp incorrect colour (4.1.4 (a))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))

Oil leaking excessively from engine (8.4.1 (a) (i))

Power steering component leaking (2.1.5 (a))

Rear Fuel tank insecure guard (6.1.3 (a) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

general corrosion under vehicle

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front lower shock bush deterioated

Offside Front Lower shock bush deterioated

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis runner. (2.4.A.3)

Centre Stop lamp not working (1.2.1b)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Stop lamp not working (1.2.1b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

o/s/r brake bind

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

o/s/r brake bind

Centre Drag link end ball joint has excessive play (2.2.B.1f)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)