MOT Status
ExpiredMileage
70,704 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Upper Suspension arm ball joint excessively worn as marked. (5.3.4 (a) (i))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge smooth inner edge (5.2.3 (e))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge badly worn inner edge (5.2.3 (e))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge badly worn inner edge (5.2.3 (e))
Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge badly worn inner edge (5.2.3 (e))
Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge badly worn inner edge (5.2.3 (e))
Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Driver's seat insecure (6.2.5 (a) (ii))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Floor excessively deteriorated (6.2.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Windscreen washer provides insufficient washer liquid (3.5 (a))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Headlamp aim too high (4.1.2 (a))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Headlamp aim too high (4.1.2 (a))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Fuel system component leaking filter (7.2.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Rear Sub-frame corroded and seriously weakened (2.4.G.1)
Offside Front Direction indicator not working (1.4.A.2c)
Offside Front Front wheel bearing has excessive play (2.5.A.3c)
Offside Rear Sub-frame corroded and seriously weakened (2.4.G.1)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Front Mechanical brake component has restricted free movement (3.5.1k)
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Mechanical brake component has restricted free movement (3.5.1k)
Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front wheel bearing has slight play (2.5.A.3c)
o/s/f tyre age cracked
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Steering rack gaiter split (2.2.D.2d)
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Sub-frame has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Direction indicator not working (1.4.A.2c)
Offside Front Steering rack gaiter split (2.2.D.2d)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7)
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front wheel bearing has slight play (2.5.A.3c)
o/s/f tyre age cracked
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)
Nearside Front wheel bearing has excessive play (2.5.A.3c)
Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)
Nearside Rear Sub-frame corroded and seriously weakened (2.4.G.1)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Parking brake: efficiency below requirements (3.7.B.7)
front gearbox or wheel bearings noisey
Nearside Rear Brake pivot has restricted free movement (3.5.1k)
Nearside Rear Rear position lamp(s) incorrect colour (1.1.A.3e)
Nearside Rear Stop lamp emits other than a steady red light (1.2.1e)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Front Driver's seat insecure (6.2.A.1)
Offside Rear Rear position lamp(s) incorrect colour (1.1.A.3e)
Offside Rear Registration plate lamp not working (1.1.5c)
Offside Rear Stop lamp emits other than a steady red light (1.2.1e)
offside rear tyre nail close to sidewall
rear subframe getting very thin
Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)
rear subframe corroded
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Rover Mini?
Based on 519,169 MOT tests across 45,631 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
W338 KHR is a 2000 Rover Mini in Red with a 1,275cc petrol engine. This vehicle has been through 35 MOT tests with a personal pass rate of 54.3%.
Across all 2000 Rover Mini models, the average MOT pass rate is 71.2% with a typical mileage of 39,248 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Rover Mini fails its MOT is subframe mounting prescribed area is excessively corroded, accounting for 32,036 recorded failures. If you're considering buying W338 KHR, it's worth having these areas checked by a mechanic before committing.
The Rover Mini typically stays on UK roads for around 47 years. At 26 years old, this Rover Mini is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of W338 KHR?
You can check the full history of W338 KHR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was W338 KHR registered?
W338 KHR is a 2000 Rover Mini, first registered on 1 March 2000.
Is W338 KHR safe to buy?
The MOT history for W338 KHR shows 35 tests with a 54.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does W338 KHR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on W338 KHR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.