2000 Suzuki VL125

Chain guard missing ()

Exhaust noisy (7.1.2)

Front suspension assembly slightly bent (2.3.1)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Chain guard missing ()

Exhaust noisy (7.1.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension assembly slightly bent (2.3.1)

Rear wheel bearings have slight free play (2.4.A.2c)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust mounting deteriorated. (7.1.1.c)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Rear Floor brake test indicates a binding brake (3.3.C2c)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Front shock absorber has light misting of stanchion (2.3.3)

Drive chain slightly loose (6.2.1d)

Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Clutch worn and beggining to slip

Drive chain worn to excess (6.2.1e)

Front Roller brake test indicates a binding brake (3.3.A1a)

Horn not working (1.7.3a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Clutch worn and beggining to slip

Front tyre pressure low

Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Headlamp masks/converters fitted

rear tyre sidewall perished and split

Offside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake linkage has abnormal movement due to excessive wear (3.2.A1i)

Registration plate deteriorated (6.3.1d)