2000 Toyota Yaris

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Child Seat fitted not allowing full inspection of adult belt ()

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

underside covered in sealant

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear axle corroded

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Coil spring corroded both (5.3.1 (b) (i))

Front Headlamp lens slightly defective both (4.1.1 (b) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Shock absorbers has light misting of oil both (5.3.2 (b))

Rear axle corroded

Suspension component mounting prescribed area is corroded but not considered excessive all under body (5.3.6 (a) (i))

Front Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Coil spring corroded both (5.3.1 (b) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Shock absorbers has light misting of oil both (5.3.2 (b))

Rear axle corroded

Suspension component mounting prescribed area is corroded but not considered excessive all under body (5.3.6 (a) (i))

Front Brake pipe corroded, covered in grease or other material both (1.1.11 (c))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Shock absorbers has light misting of oil both (5.3.2 (b))

Emissions not tested (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and outer (6.1.1 (c) (i))

Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced and outer sill (6.1.1 (c) (i))

Front Brake pipe corroded, covered in grease or other material both (1.1.11 (c))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Shock absorbers has light misting of oil both (5.3.2 (b))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Central Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement nearside & offside front (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material all brake pipes (1.1.11 (c))

Tyre slightly damaged/cracking or perishing nearside & offside front (no cords showing at time of test (5.2.3 (d) (ii))

Tyre slightly damaged/cracking or perishing nearside & offside rear (no cords showing at time of test (5.2.3 (d) (ii))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement nearside & offside front (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material all brake pipes (1.1.11 (c))

Tyre slightly damaged/cracking or perishing nearside & offside front (no cords showing at time of test (5.2.3 (d) (ii))

Tyre slightly damaged/cracking or perishing nearside & offside rear (no cords showing at time of test (5.2.3 (d) (ii))

Both rear tyres cracked but not showing cords

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

both front tyres cracked but not showing cords

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

o/s/r tyre distorted

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

both rear tyres starting to perrish

knocking noise on nearside front when pressing brake-may need further inspection