MOT Status
ExpiredMileage
29,629 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Vehicle structure has slight corrosion (6.1.A.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Rear position lamp(s) not working (1.1.A.3b)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Front wheel bearing has excessive play (2.5.A.3c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Vehicle structure has slight corrosion (6.1.A.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Emissions not tested (7.4.B.1)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Stop lamp not working (1.2.1b)
Offside Front Front wheel bearing has excessive play (2.5.A.3c)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)
Nearside Inner Body has slight corrosion (6.1.B.2)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Inner Body has slight corrosion (6.1.B.2)
Play in steering rack inner joint(s)
Rear Body has slight corrosion (6.1.B.2)
Rear Shock absorber has slight corrosion to the casing (2.7.2a)
drivers seat worn
Front Exhaust has a major leak of exhaust gases (7.1.2)
Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
front brake excessively fluctuating (3.7.B.3)
Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
brake pedal rubber worn
coil spring corroded (2.4.C.1b)
front slam panel corroded
m a n light on
outer sill corroded
rear brake fluctuating, but not excessively (3.7.B.3)
rear shock covers corroded
underside of vehicle heaverly corroded
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
handbrake outer cables deteriorated
rear n/s & centre seats not fitted at time of test
rear shockabsorber shrouds deteriorated
underside of vehicle heavily corroded but plated
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
handbrake outer cables deteriorated
rear n/s & centre seats not fitted at time of test
rear shockabsorber shrouds deteriorated
underside of vehicle heavily corroded but plated
Brakes imbalanced across an axle (3.7.B.5b)
Centre Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on main beam (1.7.5a)
Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
front brake juddering severely (3.7.A.2b)
Brake pipe slightly corroded (3.6.B.2c)
Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Play in steering rack inner joint(s)
coil spring corroded (2.4.C.1b)
e.m.l. light on
hand brake outer cables split
rear brake juddering slightly (3.7.A.5b)
rear shock covers corroded
Brake pipe slightly corroded (3.6.B.2c)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both front & o/s rear tyres worn on iner edges
both outer sills corroded not holed
discs corroded & worn
front slam panel corroded
general underside corrosion
glow plug light on
o/s iner c v boot split
rear brake juddering slightly (3.7.A.5b)
rear shock covers corroded
Offside Headlamp not working on dipped beam (1.7.5a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Brake pipe slightly corroded (3.6.B.2c)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both front & o/s rear tyres worn on iner edges
both outer sills corroded not holed
discs corroded & worn
front slam panel corroded
general underside corrosion
glow plug light on
o/s iner c v boot split
rear brake juddering slightly (3.7.A.5b)
rear shock covers corroded
Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Macpherson strut is slightly stiff in the upper support bearing assembly (2.5.B.1b)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear brake disc slightly pitted (3.5.1h)
both outer sills heavily corroded
both rear shockabsorber shrouds heavily corroded
long travel on footbrake
rear outer seats insecure
slam panel heavily corroded
slight rear brake judder
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Macpherson strut is slightly stiff in the upper support bearing assembly (2.5.B.1b)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear brake disc slightly pitted (3.5.1h)
both outer sills heavily corroded
both rear shockabsorber shrouds heavily corroded
long travel on footbrake
long travel on handbrake
rear outer seats insecure
slam panel heavily corroded
slight rear brake judder
Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
both rear shockabsorber shrouds corroded
both wipers split
several areas of underside becoming weak with corrosion
stone chip in windscreen
Front registration plate deteriorated (6.3.1d)
Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)
Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
Rear registration plate deteriorated (6.3.1d)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
front and rear no plates faded
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
W352 ADW is a 2000 Mercedes-benz Vito in Black with a 2,151cc diesel engine. This vehicle has been through 18 MOT tests with a personal pass rate of 50%.
Across all 2000 Mercedes-benz Vito models, the average MOT pass rate is 62.9% with a typical mileage of 111,462 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying W352 ADW, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 26 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of W352 ADW?
You can check the full history of W352 ADW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was W352 ADW registered?
W352 ADW is a 2000 Mercedes-benz Vito, first registered on 1 March 2000.
Is W352 ADW safe to buy?
The MOT history for W352 ADW shows 18 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does W352 ADW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on W352 ADW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.