2000 Toyota Yaris

Brake lever has insufficient reserve travel (1.1.2 (a))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component corroded but not seriously weakened rear beam axle (5.3.3 (b) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords sidewall (5.2.3 (d) (i))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Brake pipe excessively corroded flexi hose to wheel cylinder (1.1.11 (c))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Suspension component corroded but not seriously weakened rear beam axle (5.3.3 (b) (i))

Rear Coil spring corroded n/s and o/s (5.3.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear fuel filler neck slightly corroded

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear coil spring corroded (2.4.C.1b)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear coil spring corroded (2.4.C.1b)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

front suspension tie bar bushes cracking

pitting / corrosion on front brake discs

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Front Headlamp not in a clean condition but not affecting beam image (1.2.4a)

Offside Front Headlamp not in a clean condition but not affecting beam image (1.2.4a)