2000 Toyota Yaris

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both front roll bar link bushes deteriorated (5.3.4 (a) (i))

Front Suspension arm corroded but not seriously weakened both front arms corroded (5.3.3 (b) (i))

Rear Suspension component pin or bush slightly worn rear axle bushes deteriorated (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill corroded (5.3.6 (a) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill corroded (5.3.6 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both front roll bar link bushes deteriorated (5.3.4 (a) (i))

Front Suspension arm corroded but not seriously weakened both front arms corroded (5.3.3 (b) (i))

Rear Suspension component pin or bush slightly worn rear axle bushes deteriorated (5.3.4 (a) (i))

Front Anti-roll bar linkage corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm damaged but not seriously weakened (5.3.3 (b) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Brake lever has insufficient reserve travel (1.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Front Headlamp lens seriously defective both (4.1.1 (b) (ii))

Nearside Front Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii))

Rear Brake load sensing valve linkage defective and function impaired (1.1.17 (a))

Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength mount areas both sides (5.3.6 (a) (i))

Front Tyre tread depth below requirements of 1.6mm both (5.2.3 (e)) DANGEROUS

Front Anti-roll bar pin or bush worn but not resulting in excessive movement drop links both sides (5.3.4 (a) (i))

Rear Shock absorbers has light misting of oil both (5.3.2 (b))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement drop link rubbers (5.3.4 (a) (i))

Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement beam bushes (5.3.4 (a) (i))

Front Headlamp lens seriously defective both (4.1.1 (b) (ii))

Front Lower Exhaust system insecure (6.1.2 (a))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))

Rear Brake load sensing valve linkage defective and function impaired snapped (1.1.17 (a))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill ends both sides (5.3.6 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement drop link rubbers (5.3.4 (a) (i))

Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement beam bushes (5.3.4 (a) (i))

rear chassis slight corrosion

suspension bushes deteriorating

Central Rear Registration plate deteriorated but not likely to be misread faded (0.1 (b))

Front Headlamp lens slightly defective n/s and o/s (4.1.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced under-side of vehicle (6.1.1 (c) (i))

Nearside Rear Brake load sensing valve linkage defective but function not impaired (1.1.17 (a))

Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))

Body has slight corrosion rear inner sills n/s and o/s (6.1.B.2)

Central Rear registration plate faded but not likely to be misread (6.3.1d)

Front Headlamp deteriorated but light output not reduced nearside and offside (1.7.5a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Body has slight corrosion rear inner sills n/s and o/s (6.1.B.2)

Central Rear registration plate faded but not likely to be misread (6.3.1d)

Front Headlamp deteriorated but light output not reduced nearside and offside (1.7.5a)

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim too low (1.8)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Parking brake lever has little reserve travel (3.1.6b)

exhaust corroded

Rear Tyre worn close to the legal limit o/s n/s (4.1.E.1)

Rear coil spring corroded o/s n/s (2.4.C.1b)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear coil spring corroded (2.4.C.1b)

Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

rear tyres have slight brake up , no ply or cord exposed.

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Exhaust system not adequately supported (7.1.1)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

rear tyres have slight brake up , no ply or cord exposed.