2000 Mazda 626

Front Tyre(s) with different aspect ratios are fitted on the same axle. (5.2.3 (b))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner ach (7.1.1 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Service brake fluctuating, but not excessively both (1.2.1 (e))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner/outer sill (5.3.6 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner/outer sill (5.3.6 (a) (i))

Rear Service brake fluctuating, but not excessively both (1.2.1 (e))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear suspension components corroded

Central Rear Upper Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear slight bind on wheel

Central Rear Upper Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Headlamp aim too high (4.1.2 (a))

Offside Rear slight bind on wheel

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Rear parking brake only just met minimum requirements

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Engine covers fitted obscuring some components in the engine bay

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Under-trays fitted obscuring some underside components

hi-level brakelamp inop

Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Trailing arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)

front and rear suspension rusted

Nearside Rear rear brake binding (3.7.B.1)