2000 Fiat Ducato

Underbody covered with under seal( front to rear)

Horn not working (7.7 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i))

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))

Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Door step (7.1.1 (a) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i))

Windscreen washer not working (3.5 (a))

All rear chassis have arears of surface rust

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner wing (5.3.6 (a) (i))

Nearside Front Suspension component mounting repair covered in underseal Inner wing (5.3.6 (a) (i))

Offside Front Suspension component mounting repair covered in underseal Inner wing (5.3.6 (a) (i))

Emissions unable to be completed (8.2.2.2 (e))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust system insecure (6.1.2 (a))

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i))

All rear chassis have arears of surface rust

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner wing (5.3.6 (a) (i))

All rear chassis have arears of surface rust

Exhaust system in poor condition

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner wing front chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner wing front chassis (5.3.6 (a) (i))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Horn not working (7.7 (a))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Engine sump rusting

Front Registration plate missing (0.1 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Engine sump rusting

Nearside Front Brake hose has slight corrosion to ferrule X 2 (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule X 2 (1.1.12 (f) (i))

Nearside Front Brake pipe excessively corroded into brake hoses x2 (1.1.11 (c))

Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Offside Front Brake pipe excessively corroded into brake hoses x2 (1.1.11 (c))

Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Windscreen washer not working (3.5 (a))

Nearside Front Brake pipe corroded, covered in grease or other material both pipes into flexi (1.1.11 (c))

Nearside Brake pipe excessively corroded front to rear pipe (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material both pipes into flexi (1.1.11 (c))

Front Cross member corroded

Nearside Brake pipe corroded, covered in grease or other material Front to Rear (1.1.11 (c))

Nearside Front Lower Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Front Cross member corroded

Nearside Brake pipe corroded, covered in grease or other material Front to Rear (1.1.11 (c))

Nearside Front Lower Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Subframe mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Nearside Rear Brake pipe excessively corroded on axle (3.6.B.2c)

Rear Brake load sensing valve seized (3.6.E.3)

rear brake application uneven (3.7.B.2)

rear brakes release unevenly (3.7.B.4)

Exhaust system not adequately supported (7.1.1)

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Lower Subframe mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust system not adequately supported (7.1.1)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing has slight play (2.6.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front crossmember corroded

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Windscreen washer provides insufficient washer liquid (8.2.3)