2000 Yamaha R6

Fairings insecure but not likely to impede the steering (2.1.2e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear position lamp deteriorated but function not impaired (1.1.1b)

Wheel alignment slightly misaligned. (2.5.1)

gear pedal stiff

Direction indicators flashing more than 120 times per minute (1.5.1c)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front shock absorber seal failed and leaking oil (2.3.3)

Headlamp aim too low (1.6)

Rear reflector on motorcycle incorrectly positioned (1.4.2d)

Fairings insecure but not likely to impede the steering (2.1.2e)

Rear position lamp deteriorated but function not impaired (1.1.1b)

Wheel alignment slightly misaligned. (2.5.1)

front tyre flat

gear pedal stiff

Exhaust noisy (7.1.2)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering headbearing has slight free play (2.2.2)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Headlamp aim too low (1.6)

Rear Footrest missing (6.2.1a)

Rear reflector on motorcycle missing (1.4.1)

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front Front shock absorber has light misting of stanchion (2.3.3)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Front shock absorber has light misting of stanchion (2.3.3)

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim too high (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Tyre valve stem slightly damaged (4.1.2c)

Small undersized number plate fitted.

fixing screw missing from hugger.