2000 Honda NTV650

Front Fork misting right hand side

Footrest slightly loose x2 riders (6.2.12 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced frame (6.1.1 (c) (i))

Front Brake disc contaminated (1.1.14 (b))

Front Shock absorber has a serious fluid leak x2 (5.3.2 (b))

Offside Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii))

Nearside Front Brake hose leaking (1.1.12 (c)) DANGEROUS

Footrest slightly loose x2 riders (6.2.12 (a))

Front Brake hose slightly damaged (1.1.12 (b) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced frame (6.1.1 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake indicates a slightly grabbing brake (1.2.1 (c))

rear tyre under inflated

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Handlebar excessively deformed (2.2.1 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Brake disc(s) has excessive run out (3.2.A1m)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Throttle operating incorrectly (6.2.1f)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front suspension has inadequate damping effect. (2.3.6c)

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)

Throttle operating incorrectly (6.2.1f)

Front Brake disc(s) slightly worn (3.2.A1l)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Headlamp aim not tested (1.6)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Throttle operating incorrectly (6.2.1f)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Nearside Front shock absorber seal failed and leaking oil (2.3.3) DANGEROUS

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Steering headbearing has slight free play (2.2.2)

Brake lever cannot be applied smoothly (3.1.3d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Throttle operating incorrectly (6.2.1f)