2000 Honda CBR600F

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Indicator switch faulty (4.4.2 (a) (i))

Indicator switch faulty (4.4.2 (a) (i))

Shock absorber has a light misting of oil (5.3.2 (b))

Headlamp aim too high (1.6)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Upper Brake hose excessively deteriorated brake hose join corroded (3.2.B3b)

Rear Brake hose excessively deteriorated brake hose banjo corroded (3.2.B3b)

Rear Rear suspension fouling which affects the movement of the rear suspension links fouling rear hugger (2.4.A.3a)

Throttle operating incorrectly sticks on rh lock (6.2.1f)

Rear suspension bush has slight free play (2.4.A2a(i))

no high beam indicator

no neutral light

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre valve stem slightly damaged (4.1.2c)

Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Wheel alignment slightly misaligned. (2.5.1)

Drive chain excessively tight (6.2.1d)

Front Roller brake test indicates a binding brake (3.3.A1a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Wheel alignment slightly misaligned. (2.5.1)

rear light one bulb not working

Drive chain slightly tight (6.2.1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)