2000 Citroen Berlingo

brake pipes corrosing

nsr wheel cylinder damp

oil leak

osf bottom arm rear bush deteriorating

outer body, under bonnet and underside vehicle showing signs of corrosion

rera number plate deteriorating

slight play in steering rack

Suspension arm ball joint excessively worn osf bottom ball joint (5.3.4 (a) (i))

Suspension arm pin or bush excessively worn osf bottom arm rear bush (5.3.4 (a) (i))

Track rod end ball joint has excessive play os (2.1.3 (b) (i))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced os centre outer sill (6.1.1 (c) (i))

Wheel bearing has excessive play osf wheel bearing (5.1.3 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

ns number plate light inop

oil leak

osf bottom arm rear bush deteriorating

rear number plate deteriorating

slight play in steering rack

both front side repeaters discoloured

brake pipes corroding-not checked properly due to protective covers

handbrake travel

ns and os rear subframe mounting area corroded

nsf and both rear indicators discoloured

nsr brake binding slightly

oil leak

Anti-roll bar linkage has excessive play in a ball joint ns and os front (2.4.G.2)

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ns and os outer sills corroded- seatbelt area (6.1.B.2)

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nsr outer sill - suspension area (6.1.B.2)

Brake hose excessively deteriorated ns and os front flexi brake hoses through to cords (3.6.B.4d)

Brake load sensing valve seized and return spring broken (3.6.E.3)

Brake pipe excessively corroded nsr brake pipe (3.6.B.2c)

Direction indicator incorrect colour osf (1.4.A.2f)

Exhaust system not adequately supported centre exhaust mounting broken (7.1.1)

Front position lamp(s) not working osf (1.1.A.3b)

Headlamp aim too high ns and os (1.8)

Stop lamp not working ns (1.2.1b)

Suspension arm has excessive play in a pin/bearing ns and os front (2.4.G.2)

Windscreen washer provides insufficient washer liquid os (8.2.3)

both front side repeaters discoloured

handbrake travel

ns and os rear subframe mounting area corroded

nsf and both rear indicators discoloured

nsr brake binding slightly

oil leak

Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

oil leak

Brake pipe excessively corroded all rear (3.6.B.2c)

Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)

Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Service brake: efficiency below requirements (3.7.B.7)

oil leak

nearside headlight has a poor beam pattern

Nearside Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

rear exhaust rubber torn

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Stop lamp not working (1.2.1b)

Rear Brake pipe slightly corroded (3.6.B.2c)

cracks in nearsidetyre sidewall

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Rear Brake pipe slightly corroded (3.6.B.2c)

cracks in nearsidetyre sidewall

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Trailing arm has slight play in a pin/bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

front and rear no plates marked

Exhaust has a major leak of exhaust gases (7.1.2)

Indicator switch faulty (1.4.A.1)

front and rear no plates marked