2000 Subaru Impreza

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

complete exhaust system heavily corroded

complete rear subframe corroded

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Nearside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive Wheel arch (7.1.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake performance not tested (1.2.1 (g))

Offside Front Service brake grabbing severely (1.2.1 (c))

Offside Front Outer Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner wheel arch (6.2.2 (d) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arch (6.2.2 (d) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

exhaust system corroded

Front Windscreen washer not working (3.5 (a))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner quarter panel 30cm from suspension mounting (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

exhaust system corroded

Offside Front Tyre tread depth below requirements of 1.6mm edges wearing (4.1.E.1)

Nearside Front Tyre worn close to the legal limit sidewall has a chunk missing (4.1.E.1)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Body has slight corrosion (6.1.B.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Rear Shock absorber has a light misting of oil (2.7.3)

Vehicle structure has slight corrosion (6.1.A.1)

Vehicle structure has slight corrosion (6.1.B.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

child seat fitted not allowing full inspection of adult belt