2000 Peugeot 106

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Shock absorbers has slight external damage to the casing (corrosion) (5.3.2 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor pan (6.1.1 (c) (i))

Offside Front Shock absorbers has slight external damage to the casing (corrosion) (5.3.2 (b))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

both inner sills have slight rust

Front Shock absorbers has slight external damage to the casing corrosion (5.3.2 (b))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Shock absorbers has slight external damage to the casing corrosion (5.3.2 (b))

slight corrosion to inner sills

Nearside Front Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Torque/reaction arm has slight play in a pin bearing (2.4.G.2)

Offside Rear Torque/reaction arm has slight play in a pin bearing (2.4.G.2)

exhaust mid box corroded

rear boot floor slight corrosion

Front registration plate deteriorated (6.3.1d)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

exhaust mid box corroded

rear boot floor slight corrosion

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear Rear fog lamp not working (1.3.2b)

Registration plate lamp not working (1.1.5c)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Headlamp not working on dipped beam (1.7.5a)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)