2000 Suzuki GSF600

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Headlamp aim too low (4.1.2 (a))

Headlamp light intensity severely reduced (4.1.4 (a))

Handlebar grip insecure to handlebar Switchgear with throttle tube not secure, can slide off handlebar (2.2.1 (d) (ii)) DANGEROUS

Front Direction indicator not working (4.4.1 (a) (ii))

Rear Stop lamp not working (4.3.1 (a) (ii))

Front Valve stem slightly damaged (5.2.3 (j))

Front Valve stem slightly damaged (5.2.3 (j))

Front Brake excessively binding (1.2.1 (f))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Valve stem slightly damaged (5.2.3 (j))

Front Tyre valve stem slightly damaged (4.1.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Fuel cap seal very slightly perished.

Front Tyre valve stem slightly damaged (4.1.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Fuel cap seal very slightly perished.

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Front Horn not working (1.7.3a)

Front Tyre valve stem slightly damaged (4.1.2c)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

one of two rear position light bulbs not working

Front Tyre valve stem slightly damaged (4.1.2c)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

one of two rear position light bulbs not working

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Drive chain excessively loose (6.2.1d)

Rear Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear suspension lightly rubbing not affecting the movement of the rear suspension (2.4.A.3a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Registration plate with character(s) which are not the correct height (6.3.4a)

Drive chain excessively loose (6.2.1d)

Front shock absorber seal failed and leaking oil (2.3.3)

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Indicator tell tale not functioning (1.5.2)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust noisy (7.1.2)

Front Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Indicator tell tale not functioning (1.5.2)

Rear Registration plate with character(s) which are not the correct height (6.3.4a)

Rear Registration plate with character(s) which are not the correct width (6.3.4a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Drive chain slightly loose (6.2.1d)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

no plate light not working

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

headlamp beam immage difficult to distinguish

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

headlamp beam immage difficult to distinguish

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Front Brake pipe union leaking fluid (3.2.B4)

headlamp beam immage dificult to distinguish

only one of two bulbs working in rear lamp

Front Wheel has a slightly distorted bead rim. (4.2.2)

headlamp beam immage dificult to distinguish

only one of two bulbs working in rear lamp

Rear Tyre worn close to the legal limit (4.1.3(ii))