2000 Suzuki VL125

Drive chain slightly tight (6.1.7 (k) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Chain guard missing

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front shock absorber has light misting of stanchion (2.3.3)

Lower Motorcycle structure slightly corroded (6.1.1a)

Oil leak

~ Foot Rest rubbers slightly seteriated. ~ Front mudgard cracked. ~ Gear lever linkage pivot slightly worn. ~ Clutch lever pivot slightly worn.

Registration plate deteriorated (6.3.1d)

Chain guard missing

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front shock absorber has light misting of stanchion (2.3.3)

Lower Motorcycle structure slightly corroded (6.1.1a)

Oil leak

~ Foot Rest rubbers slightly seteriated. ~ Front mudgard cracked. ~ Gear lever linkage pivot slightly worn. ~ Clutch lever pivot slightly worn.

Chain guard missing

Exhaust slightly deteriorated (7.1.1a)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive chain sprocket slightly worn (6.2.1e)

Chain guard missing

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

N/S & O/S Riders Foot Rest Rubbers Missing

Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Clutch lever shortened. (6.2.1g)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Nearside Drive chain sprocket slightly worn (6.2.1e)

Front wheel bearings have excessive free play (2.3.5b)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Throttle operating incorrectly (6.2.1f)

Clutch lever shortened. (6.2.1g)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Nearside Drive chain sprocket slightly worn (6.2.1e)

Nearside Drive chain sprocket slightly worn (6.2.1e)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Nearside Drive chain sprocket slightly worn (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))