MOT Status
ExpiredMileage
92,266 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch/bay (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch/sill (5.3.6 (a) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills both sides (5.3.6 (a) (i))
Rear Outer Suspension component mounting prescribed area is inadequately repaired sills both sides (5.3.6 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Inner Suspension component mounting prescribed area is corroded but not considered excessive sills both sides (5.3.6 (a) (i))
Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Valve stem slightly damaged (5.2.3 (j))
Nearside Front inner wing area corroded
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Inner side light not working
Offside Rear Valve stem slightly damaged (5.2.3 (j))
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Brake pipe excessively corroded from middle to rear flexy hose ( marked in yellow) (1.1.11 (c))
Nearside Rear Valve stem seriously damaged (5.2.3 (j)) DANGEROUS
Nearside Front Valve stem slightly damaged (5.2.3 (j))
Nearside Front inner wing area corroded
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Inner side light not working
Offside Rear Valve stem slightly damaged (5.2.3 (j))
Nearside Front floor area slight corrosion
Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Front Lower suspension arm ball joint boot slight damage / split
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
overall brake performance 56%
rear brake performance slightly low
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Side repeater not working (4.4.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Front floor area slight corrosion
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Lower suspension arm ball joint boot slight damage / split
overall brake performance 55%
rear brake performance slightly low
rear brake performance slightly low
Offside Front Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch area (2.4.A.3)
Oil leak ()
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill area (2.4.A.3)
Exhaust has a minor leak of exhaust gases rear clamp area (7.1.2)
Offside Front Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch area (2.4.A.3)
Oil leak ()
rear brake performance slightly low
Offside Front Lower Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
advise oil leak
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear fog lamp switch missing (1.3.1a)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
surface corrosion on underside
Nearside Rear Rear position lamp(s) not working (1.1.A.3b)
Nearside front brake binding (3.7.B.1)
Offside Steering rack gaiter split (2.2.D.2d)
Parking brake: efficiency below requirements (3.7.B.7)
surface corrosion on underside
advise n/s side repeator lens
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Offside Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.A.3)
Coolant leak
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
advise n/s side repeator lens
advise hand brake travel
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Side repeater not working (1.4.A.2c)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Front Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
How Reliable is the Peugeot 106?
Based on 2,880,076 MOT tests across 319,421 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
W439 RHB is a 2000 Peugeot 106 in Green with a 1,124cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 53.8%.
Across all 2000 Peugeot 106 models, the average MOT pass rate is 66.8% with a typical mileage of 66,731 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 106 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 155,158 recorded failures. If you're considering buying W439 RHB, it's worth having these areas checked by a mechanic before committing.
The Peugeot 106 typically stays on UK roads for around 34 years. At 26 years old, this Peugeot 106 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of W439 RHB?
You can check the full history of W439 RHB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was W439 RHB registered?
W439 RHB is a 2000 Peugeot 106, first registered on 28 July 2000.
Is W439 RHB safe to buy?
The MOT history for W439 RHB shows 26 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does W439 RHB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on W439 RHB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.