2000 Fiat Motorhome

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to cab seam (7.1.1 (a) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Subframe mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mounting (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mountings front & rear (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Rear Hydraulic brake cylinder leaking and braking performance affected (1.1.16 (b) (ii)) DANGEROUS

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement drop link (5.3.4 (a) (i))

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement drop link (5.3.4 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

vehicle has had general under body repairs and heavily under sealed

Horn not working (7.7 (a))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg cross member mounting (6.1.1 (c) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg cross member mounting (6.1.1 (c) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement drop link (5.3.4 (a) (i))

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement drop link (5.3.4 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

general underbody surface corrosion

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))

general underbody surface corrosion

Oil leak, but not excessive (8.4.1 (a) (i))

general under body surface corrosion

n/s/f jacking point slight surface corrosion

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

genural underbody surface corrosion

n/s/ outer sill corroded but not structural

o/s/f jacking point slight corroded

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing has slight play (2.6.2)

Power steering pipe(s) or hose(s) slightly corroded on steering rack (2.3.2)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back of sill *2 (6.1.B.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Parking brake efficiency below requirements (3.7.E.1)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing has slight play (2.6.2)

Power steering pipe(s) or hose(s) slightly corroded on steering rack (2.3.2)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brake pipe slightly corroded all (3.6.B.2c)

all exhaust rubbers split and perished

power steering pipes on rack corroded

Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.C.1b)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brake pipe slightly corroded all (3.6.B.2c)

all exhaust rubbers split and perished

power steering pipes on rack corroded

Front both front brake pipe/hose mountings slightly corroded

Rear Brake pipe slightly corroded all (3.6.B.2c)

all power steering pipes on rack corroded

Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch area (2.4.A.3)

Front both front brake pipe/hose mountings slightly corroded

Rear Brake pipe slightly corroded all (3.6.B.2c)

all power steering pipes on rack corroded

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

both front indicators have cwater ingression

service brake effiency only just been reached

Service brake: efficiency below requirements (3.7.B.7)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

offside front tyre close to wear bars

Exhaust system not adequately supported (7.1.1)

Horn not working (1.6.2a)

Offside Registration plate lamp not working (1.1.C.1d)

offside front tyre close to wear bars

coolent level on min

exhaust rubbers perished

o/s/f tyre close to wear bars inner edge

Offside Front Headlamp aim too low (1.8)

Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Nearside Front Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Rear Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Nearside Rear Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Offside Front Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Offside Outer Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Offside Rear Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear rear brake binding (3.7.B.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

slight corrosion on all metal brake pipes

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)