2000 Honda S2000

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill excessively corroded (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened nearside and offside (1.1.14 (a) (ii))

Front suspension components corroded / bushes worn

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside inner and outer sill corroded

Nearside inner sill heavily corroded

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced inner arch heavily corroded (6.1.1 (c) (i))

Offside inner and outer sill corroded

Rear Anti-roll bar linkage ball joint has slight play nearside and offside (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened heavily corroded (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive nearside and offside (5.3.6 (a) (i))

Rear all rear suspension components surface corrosion and bushes worn

Rear boot floor heavily corroded but not within any prescribed areas

Rear crash bar heavily corroded

surface corrosion on rear suspension

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake disc dust shield

Offside Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake disc dust shield

Offside Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Corrosion starting in both inner and outer sills

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Brake pipe excessively corroded Front to rear (3.6.B.2c)

Corrosion starting in both inner and outer sills

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Tyre worn close to the legal limit (4.1.E.1)

Nearside front brake binding (3.7.B.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Non obligatory mirror damaged

Bonnet cannot be secured in the closed position (8.4.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Registration plate lamp not working (1.1.5c)

Non obligatory mirror damaged

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside front brake binding (3.7.B.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)