2000 Ford Puma

Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Outer Body has slight corrosion (6.1.B.2)

Spare tyre defective

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

bonnet release cable fraying

both front wipers deteriorating

cooling fan running constantly

corrosion to underside of vehicle

exhaust corroding

Nearside rear brake binding (3.7.B.1)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Outer Body has slight corrosion (6.1.B.2)

Spare tyre defective

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

bonnet release cable fraying

both front wipers deteriorating

cooling fan running constantly

corrosion to underside of vehicle

exhaust corroding

Centre Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

rear exhaust heatshield adrift

An item not tested (Manual)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Centre Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

rear exhaust heatshield adrift

Brake pipe slightly corroded (3.6.B.2c)

Rear Brake hose slightly deteriorated (3.6.B.4d)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

rear exhaust heatshield loose

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Sub-frame has excessive play in a pin/bush (2.4.G.2)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Rear Sub-frame has excessive play in a pin/bush (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear wheel bearing rough when rotated (2.6.1)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Brake pipe slightly corroded (3.6.B.2c)

Rear Brake hose slightly deteriorated (3.6.B.4d)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

rear exhaust heatshield loose

Body has slight corrosion (6.1.B.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brake hose slightly deteriorated (3.6.B.4d)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

both front tyres wearing inside edges

both front wiperblades slightly deteriorated

both rear axle bushes slightly deteriorated

exhaust heat sheild insecure

front brake discs slightly pitted and worn

offside rear tyre on 2mm tread nearside 3mm tread and slightly out of shape

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front brake disc slightly pitted (3.5.1h)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

front brake discs corroded close to mot limits

Nearside Rear wheel bearing rough when rotated (2.6.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)