MOT Status
ValidMileage
158,189 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, but not excessively Both (1.1.14 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Front Brake disc worn, but not excessively Both (1.1.14 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Headlamp lens slightly defective both (4.1.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Service brake binding but not excessively both (1.2.1 (f))
various underbody components corroded
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Various underbody areas and components corroded
Headlamp not working on dipped beam Both (4.1.1 (a) (ii))
Headlamp not working on main beam Both (4.1.1 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Various underbody areas and components corroded
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Both D bushes (5.3.4 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Rear Seat belt missing (7.1.2 (a))
Offside Rear Seat belt missing (7.1.2 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Windscreen wiper does not clear the windscreen effectively Both (3.4 (b) (ii))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Both D bushes (5.3.4 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
sills are corroded
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
sills are corroded
Central Exhaust mounting defective (6.1.2 (a))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Various underbody area's and component's corroded
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Oil leak ()
Various area's and component's corroded
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Offside Rear fog lamp not working (1.3.2b)
Offside Stop lamp not working (1.2.1b)
Engine covers fitted obscuring some components in the engine bay
Headlamp deteriorated but light output not reduced (1.7.5a)
Oil leak
Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Nearside rear parking (secondary) brake grabbing severely (3.7.B.6b)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen wiper blade insecure (8.2.2)
Offside rear parking (secondary) brake grabbing severely (3.7.B.6b)
Rear fog lamp not working (1.3.2b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Engine covers fitted obscuring some components in the engine bay
Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front crossmember corroded
Near side front and off side front inner sills corroded
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)
Offside Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)
Front Brake pad(s) wearing thin (3.5.1g)
Front crossmember corroded
Nearside Inner Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Off and near side front inner sills corroded
Offside Inner Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front crossmember corroded
Nearside Inner Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Off and near side front inner sills corroded
Offside Inner Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
slight wear in front anti roll bar linkages x2
Offside Rear fog lamp not working (1.3.2b)
slight wear in front anti roll bar linkages x2
Offside Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
W462 SPD is a 2000 Mazda Bongo in Silver with a 2,499cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 69%.
Across all 2000 Mazda Bongo models, the average MOT pass rate is 69.4% with a typical mileage of 122,442 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying W462 SPD, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 26 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of W462 SPD?
You can check the full history of W462 SPD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was W462 SPD registered?
W462 SPD is a 2000 Mazda Bongo, first registered on 31 December 2000.
Is W462 SPD safe to buy?
The MOT history for W462 SPD shows 29 tests with a 69% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does W462 SPD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on W462 SPD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.