2000 Toyota Yaris

Vehicle structure is deformed but structural rigidity is not significantly reduced under body (6.1.1 (a) (i))

Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt both sides (2.4.G.2)

Front Shock absorber has slight corrosion to the casing both ns/os (2.7.2a)

Front exhaust corroded at mount

Front headlamps deteriated

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Rear coil spring corroded both sides (2.4.C.1b)

surface corrosion on inner sills

fuel tank neck corroded

Brake load sensing valve stiff (3.6.E.3)

Fuel Pipe/s corroded ()

Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sills (2.4.A.3)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

coil spring corroded (2.4.C.1b)

Exhaust system not adequately supported (7.1.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Stop lamp not working (1.2.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

coil spring corroded (2.4.C.1b)

Brake load sensing valve stiff (3.6.E.3)

Fuel Pipe/s corroded ()

Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sills (2.4.A.3)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brake pipe slightly corroded (3.6.B.2c)

Front Body insecure and dangerous to other road users (6.1.B.1b)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Exhaust system not adequately supported (7.1.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Body has slight corrosion (6.1.B.2)

Nearside Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake load sensing valve stiff (3.6.E.3)

Rear coil spring corroded (2.4.C.1b)

Brake pipe slightly corroded (3.6.B.2c)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Body has slight corrosion (6.1.B.2)

Nearside Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake load sensing valve stiff (3.6.E.3)

Rear coil spring corroded (2.4.C.1b)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

fuel pipe corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Stop lamp not working (1.2.1b)

fuel pipe corroded

Fuel pipe/s corroded

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Vehicle structure has slight damage (6.1.A.1)

Offside Rear coil spring corroded (2.4.C.1b)

Parking brake lever has little reserve travel (3.1.6b)

Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Rear Direction indicators slightly discoloured (1.4.A.2f)

front reg plate

handbrake slightly high

Offside Stop lamp not working (1.2.1b)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)