2000 Mazda 626

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Inner Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Windscreen washer not working (3.5 (a))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

battery light on dash

front cross member corroded

Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Windscreen wiper does not clear the windscreen effectively x2 (3.4 (b) (ii))

Nearside Front Macpherson strut attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) DANGEROUS

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

eml inop

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

eml inop

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Nearside Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

eml inop

Nearside Rear Suspension component mounting prescribed area is excessively corroded outter sill (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded outter sill (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded outter sill (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outter sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded outter sill (2.4.A.3)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside rear brake binding (3.7.B.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

o/s/f tyre soon

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

o/s/f tyre soon