2000 Honda CB600 F2-Y

Front flexi brake hoses incecure

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Front flexi brake hoses incecure

Rear Tyre worn close to the legal limit (4.1.3(ii))

Headlamp aim too low (1.6)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Chain guard missing

Steering movement slightly 'notchy' (2.2.1a)

Fairings so located that it is likely to impede the steering (2.1.2e) DANGEROUS

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) DANGEROUS

Rear suspension bearing has excessive free play (2.4.A2a(i)) DANGEROUS

Chain guard missing

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

chain guard missing

Drive chain excessively tight (6.2.1d) DANGEROUS

Front Front wheel bearings have excessive free play (2.3.5b) DANGEROUS

Front Roller brake test indicates a binding brake (3.3.A1a) DANGEROUS

Roller brake test indicates slight fluctuation of brake effort Both front and rear (3.3.A1d)

chain guard missing

Front Direction indicators flashing more than 120 times per minute (1.5.1c)

Front Headlamp dipped beam affected by the operation of another lamp (1.2.2c)

Rear Direction indicators flashing more than 120 times per minute (1.5.1c)

Front Steering control fouling between components which interferes with the free movement of the steering headlight fouling against fairing mount and clocks (2.1.2a) DANGEROUS

Front Motorcycle structure has been slightly modified engine mounts not fully supported to frame due to in correctly fitted crash bungs (6.1.1b)

Nearside Rear Chain guard missing ()

Rear rear foot pegs worn

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

gear linkage insecure

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)

noise from front brake area

o/s/f brake caliper sliders worn

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Offside Front Direction indicator incorrect colour (1.5.1b)

Rear wheel has a loose wheel nut(s) (4.2.3a)

Rear wheel insecure (4.2.3b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Nearside Front Direction indicator slightly discoloured (1.5.1b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Rear wheel bearings have slight free play (2.4.A.2c)

Drive chain worn to excess (6.2.1e)

Rear Drive chain sprocket worn to excess (6.2.1e)