2000 Fiat Marea

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake valve leaking (1.1.7 (d) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Central Exhaust mounting defective (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced BOOT AREA (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced boot floor (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive all (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

rear floor at boot and rear cross members corroded out with prescribed areas

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/jack point (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/jack point (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

rear floor at boot and rear cross members corroded out with prescribed areas

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Bumper mountings corroded but not likely to become detached at cross member (6.1.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/arch (5.3.6 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Bumper mountings corroded but not likely to become detached at cross member (6.1.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Central Exhaust system insecure (6.1.2 (a))

Emissions not tested (8.2.1.2 (d))

Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/floor (7.1.1 (a) (i))

Nearside Rear Upper Position lamp not working (4.2.1 (a))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Emissions not tested (7.3.A.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake lever has little reserve travel (3.1.6b)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear An item not tested (Manual)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Power steering component(s) leaking (2.3.3b)

Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Headlamp aim too low and too far to the right. (1.8)

Offside Headlamp aim too low (1.8)

Parking brake lever defective so that it cannot be satisfactorily operated (3.1.3c)