2000 Nissan Micra

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner wing (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Centre Rear Upper Stop lamp not working (1.2.1b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Rear Body insecure and dangerous to other road users bumper (6.1.B.1b)

Brake pipe slightly corroded (3.6.B.2c)

Rear bumper insecure

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

front cross member slightly corroded

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Brake pipe slightly corroded (3.6.B.2c)

Rear bumper insecure

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

front cross member slightly corroded

Brake pipe slightly corroded (3.6.B.2c)

Rear bumper insecure

front cross member slightly corroded

inner/outer sills slightlyt corroded

slight bind on n/s front wheel

slight corrosion under rear wheel arches

Brake pipe slightly corroded (3.6.B.2c)

Nearside Stop lamp not working (1.2.1b)

Rear bumper insecure

front cross member slightly corroded

inner/outer sills slightlyt corroded

slight bind on n/s front wheel

slight corrosion under rear wheel arches

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

front cross member slightly corroded

Centre Stop lamp not working (1.2.1b)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

front cross member slightly corroded

slight knocking fron steering when rocking

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Panhard rod damaged but not seriously weakened (2.4.G.1)

exhaust slightly deterioted

front cross member slightly corroded

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too low (1.8)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Panhard rod damaged but not seriously weakened (2.4.G.1)

exhaust slightly deterioted

front cross member slightly corroded

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Anti-roll bar slightly distorted (2.4.G.1)

Temporary fuel cap fitted

front number playe vravked

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Road wheel cracked (4.2.A.1a) DANGEROUS

Nearside Rear rear brake recording little or no effort (3.7.B.5a) DANGEROUS

Offside Rear rear brake recording little or no effort (3.7.B.5a) DANGEROUS

Nearside Front All position lamps not working (1.1.A.3b)

Nearside Front Front position lamp(s) incorrect colour (1.1.A.3e)

Offside Front Front position lamp(s) incorrect colour (1.1.A.3e)

Offside Front front brake application uneven (3.7.B.2)

Offside Front front brake binding (3.7.B.1)