MOT Status
ExpiredMileage
102,039 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake hose has slight corrosion to ferrule various (1.1.12 (f) (i))
Front Direction indicator slightly discoloured (4.4.3 (a))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Rear Brake load sensing valve inoperative but ABS functioning spring is insecure (1.1.17 (c) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Brake hose has slight corrosion to ferrule various (1.1.12 (f) (i))
Front Direction indicator slightly discoloured (4.4.3 (a))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))
Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Front Bumper insecure (6.1.4 (a) (i))
Offside Rear Brake load sensing valve linkage defective and function impaired spring broken off (1.1.17 (a))
Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))
Oil leak ()
under body corroded
Nearside Rear Braking system leaking wheel cylinder (3.6.A.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Rear rear brake recording little or no effort (3.7.B.5a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded chassis leg (2.4.A.3)
Offside Rear rear brake recording little or no effort (3.7.B.5a)
Offside Stop lamp not working (1.2.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Service brake: efficiency below requirements (3.7.B.7)
Oil leak ()
under body corroded
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Brake load sensing valve inoperative spring broken (3.6.E.3)
Horn not working (1.6.2a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Nearside rear brake binding (3.7.B.1)
Offside Headlamp aim not tested (1.8.A.1c)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside rear brake binding (3.7.B.1)
Service brake: efficiency below requirements (3.7.B.7)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Rear axle arm seizing and making loud squeak noise
Brake load sensing valve linkage defective and function impaired (3.6.E.3)
Brake pipe excessively corroded both front to rear pipes (3.6.B.2c)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Direction indicator incorrect colour showing white light (1.4.A.2f)
Nearside Front Suspension spring mounting prescribed area is excessively corroded strut tower corroded and holed (2.4.A.3)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside front brake excessively fluctuating (3.7.B.3)
Offside Front coil spring broken (2.4.C.1a)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Rear Brake pipe excessively corroded all pipes at load valve (3.6.B.2c)
Side repeater incorrect colour both side repeaters showing white light (1.4.A.2f)
Offside Rear axle arm seizing and making loud squeak noise
Brake pipe slightly corroded (3.6.B.2c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Rear Brake pipe slightly corroded (3.6.B.2c)
front brake discs corroded
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Offside Track rod end ball joint has slight play (2.2.B.1f)
both front strut top mountings siezing
All position lamps not working (1.1.A.3b)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Offside Track rod end ball joint has slight play (2.2.B.1f)
both front strut top mountings siezing
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
both front suspension arm rear bushes slightly deteriorated
front brake discs slightly worn and corroded
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
both front suspension arm rear bushes slightly deteriorated
How Reliable is the Citroen Berlingo?
Based on 4,453,235 MOT tests across 354,716 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
W492 BPU is a 2000 Citroen Berlingo in Blue with a 1,868cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 70%.
Across all 2000 Citroen Berlingo models, the average MOT pass rate is 64.9% with a typical mileage of 106,222 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Citroen Berlingo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 117,833 recorded failures. If you're considering buying W492 BPU, it's worth having these areas checked by a mechanic before committing.
The Citroen Berlingo typically stays on UK roads for around 29 years. At 26 years old, this Citroen Berlingo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of W492 BPU?
You can check the full history of W492 BPU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was W492 BPU registered?
W492 BPU is a 2000 Citroen Berlingo, first registered on 3 April 2000.
Is W492 BPU safe to buy?
The MOT history for W492 BPU shows 20 tests with a 70% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does W492 BPU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on W492 BPU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.