MOT Status
ExpiredMileage
122,294 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust silencer slightly loose (8.1.1 (b) (i))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement lower arm front bush (5.3.4 (a) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement lower arm front bush (5.3.4 (a) (i))
fuel filler neck slightly corroded
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch bottom by sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch bottom by sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Rear Exhaust has a major leak of exhaust gases by exhaust joint (6.1.2 (a))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement lower arm front bush (5.3.4 (a) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement lower arm front bush (5.3.4 (a) (i))
fuel filler neck slightly corroded
Brake hose has slight corrosion to ferrule both fronts. (1.1.12 (f) (i))
Fuel Pipe/s corroded fuel filler neck pipes
Headlamp lens slightly defective both deteriorated (4.1.1 (b) (i))
Suspension component corroded but not seriously weakened all front and rear suspension components surface corrosion (5.3.3 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both inner sills surface corrosion (5.3.6 (a) (i))
Brake hose has slight corrosion to ferrule all flexi hoses corroded (1.1.12 (f) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Rear Shock absorbers has light misting of oil (5.3.2 (b))
Suspension component mounting prescribed area is corroded but not considered excessive rear inner and outer sill corroded (5.3.6 (a) (i))
engine and power steering fluid leaks
headlamp output reduced, lenses faded
minimum pass on brake effiency only just met the requirements
service brake pedal long travel
slight binding on rear brakes
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Power steering pipe/hose has slight seepage rack area (2.1.5 (a))
Shock absorbers has light misting of oil both rears (5.3.2 (b))
Suspension component mounting prescribed area is corroded but not considered excessive inner sills (5.3.6 (a) (i))
vehicle underbody light surface corrosion
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust has a major leak of exhaust gases downpipe (6.1.2 (a))
Headlamp has a product on the lens so that the light output is severely reduced both fronts (4.1.4 (b))
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Power steering pipe/hose has slight seepage rack area (2.1.5 (a))
Shock absorbers has light misting of oil both rears (5.3.2 (b))
Suspension component mounting prescribed area is corroded but not considered excessive inner sills (5.3.6 (a) (i))
vehicle underbody light surface corrosion
Brake hose has slight corrosion to ferrule all four (1.1.12 (f) (i))
Headlamp has a product on the light source but not seriously reducing light output both fronts (4.1.4 (b))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Power steering component has slight seepage from a component rack steering area (2.1.5 (a))
Shock absorbers light misting of oil or has limited damping effect nearside and offside rears (5.3.2 (b))
Suspension component mounting prescribed area is corroded but not considered excessive both rear inner sills (5.3.6 (a) (i))
general vehicle underbody light corrosion
outer sills covers fitted
Brake hose has slight corrosion to ferrule All ferrules (1.1.12 (f) (i))
General underbody corrosion
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Exhaust mounting defective Joining clamp deteriorated (6.1.2 (a))
Sills covers fitted on both sides front to rear, not allowing full inspection
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill-as marked (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill-as marked (5.3.6 (a) (i))
Brake hose has slight corrosion to ferrule All ferrules (1.1.12 (f) (i))
General underbody corrosion
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Offside Rear Exhaust mounting defective Joining clamp deteriorated (6.1.2 (a))
Sills covers fitted on both sides front to rear, not allowing full inspection
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
both rear shock absorbers corroded
sill covers fitted not allowing full inspection of the outer sills
towbar corroded
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust system insecure centre to rear section (6.1.2 (a))
Offside Body component damaged and likely to cause injury door mirror casing (6.2.1 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
both rear shock absorbers corroded
sill covers fitted not allowing full inspection of the outer sills
towbar corroded
Exhaust has a minor leak of exhaust gases (7.1.2)
Headlamp deteriorated but light output not reduced both (1.7.5a)
exhaust system deteriorated
Light exhaust blow at manifold area
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Front Brakes imbalanced across an axle (3.7.B.5b)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Light binding at o/s front wheel
Light exhaust blow at manifold area
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Exhaust front flange deteriorated
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement Trailing arm bush (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement Trailing arm bush (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Centre Front Upper Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Direction indicator incorrect colour (1.4.A.2f)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Centre Front Upper Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Parking brake lever has little reserve travel (3.1.6b)
Centre Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Headlamp aim too high (1.8)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Headlamp aim too high (1.8)
Offside Rear rear brake binding (3.7.B.1)
Trailer electrical socket (13 pin) not operating the trailer lamps as intended (1.9.4)
Centre Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Rear Parking brake lever has little reserve travel (3.1.6b)
Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Stop lamp not working (1.2.1b)
Nearside rear brake binding (3.7.B.1)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Child seat fitted not allowing full inspection of adult belt
offside rear tyre worn on inner edges.
Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside rear brake binding (3.7.B.1)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Child seat fitted not allowing full inspection of adult belt
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
offside rear tyre worn on inner edges.
Nearside Stop lamp not working (1.2.1b)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Rear brake disc slightly pitted (3.5.1h)
rear axles bushes perrished.
How Reliable is the Honda Civic Aerodeck?
Based on 54,884 MOT tests across 4,141 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
W494 JSX is a 2000 Honda Civic Aerodeck in Silver with a 1,590cc petrol engine. This vehicle has been through 30 MOT tests with a personal pass rate of 63.3%.
Across all 2000 Honda Civic Aerodeck models, the average MOT pass rate is 67.9% with a typical mileage of 86,079 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Civic Aerodeck fails its MOT is constant velocity joint gaiter split, accounting for 2,938 recorded failures. If you're considering buying W494 JSX, it's worth having these areas checked by a mechanic before committing.
The Honda Civic Aerodeck typically stays on UK roads for around 28 years. At 26 years old, this Honda Civic Aerodeck is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of W494 JSX?
You can check the full history of W494 JSX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was W494 JSX registered?
W494 JSX is a 2000 Honda Civic Aerodeck, first registered on 26 August 2000.
Is W494 JSX safe to buy?
The MOT history for W494 JSX shows 30 tests with a 63.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does W494 JSX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on W494 JSX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.