2000 Toyota Yaris

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Front Front passenger door hinge deteriorated but the door can still be readily opened and closed (6.2.3 (c) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Stop lamp(s) non-obligatory stop lamp not working Hi level (4.3.1 (a) (ii))

Brake load sensing valve linkage defective and function impaired (1.1.17 (a))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Front passenger door hinge deteriorated but the door can still be readily opened and closed (6.2.3 (c) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Stop lamp(s) non-obligatory stop lamp not working Hi level (4.3.1 (a) (ii))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Horn sound not in accordance with requirements (7.7 (c))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Horn control insecure (7.7 (b))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Front brake slightly binding

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Front brake slightly binding

Front Exhaust has a minor leak of exhaust gases manifold (7.1.2)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

catalytic converter supports corroded

Nearside Rear wheel bearing rough when rotated (2.6.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Headlamp aim too low and too far to the right. (1.8)

Nearside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Headlamp aim too low (1.8)

Offside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Front Brake hose twisted (3.6.B.4c) DANGEROUS

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

n/s/f tyre has damage to outer sidewall

front outer a/r/bar bushes cracked/perished

front tyres on 1.6mm on edges

n/s/r tyre on 2mm on edge