2000 Daihatsu Cuore

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Parking brake lever has little reserve travel (3.1.6b)

Rear Body has slight corrosion (6.1.B.2)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Shock absorber has a light misting of oil (2.7.3)

fuel filler pipes corroded

Exhaust system not adequately supported (7.1.1)

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.3.D.1)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Front wheel bearing rough when rotated (2.5.A.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Shock absorber has a light misting of oil (2.7.3)

fuel filler pipes corroded

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front drive shaft coupling is excessively worn (2.5.C.1c)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front drive shaft coupling is excessively worn (2.5.C.1c)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Upper Coil spring mounting corroded and seriously weakened (2.4.C.3c)

Offside Rear Upper Coil spring mounting corroded and seriously weakened (2.4.C.3c)

Front Brake pad(s) wearing thin (3.5.1g)

front brake discs inner surface corroded but not affecting brake

Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)