2000 Mazda Demio

Fuel system component insecure filler neck corroded and holed. (7.2.1)

Fuel system component insecure fuel tank breather. (7.2.1)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Coil spring not correctly located (2.4.C.2)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Rear Tyre worn close to the legal limit 2.6mm (4.1.E.1)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear coil spring corroded (2.4.C.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear coil spring corroded (2.4.C.1b)

fuel tank neck rusty

Front Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Brake pad(s) wearing thin (3.5.1g)

Front Shock absorber has slight corrosion to the casing (2.7.2a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front coil spring corroded (2.4.C.1b)

Offside Inner Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear coil spring corroded (2.4.C.1b)

Rear Trailing arm corroded and seriously weakened (2.4.G.1) DANGEROUS

Front Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Brake pad(s) wearing thin (3.5.1g)

Front Shock absorber has slight corrosion to the casing (2.7.2a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front coil spring corroded (2.4.C.1b)

Offside Inner Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear coil spring corroded (2.4.C.1b)

Front Shock absorber has slight corrosion to the casing (2.7.2a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear coil spring corroded (2.4.C.1b)

o/s fuel tank strap rusty

Front Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear coil spring corroded (2.4.C.1b)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Child seat fitted not allowing full inspection of adult belt

Nail in offside rear tyre

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Tempory fuel cap fitted but has a good seal

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Parking brake lever has no reserve travel (3.1.6b)

Rear registration plate character(s) likely to be misread (6.3.4b)

rear brake application uneven (3.7.B.2)

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)