2000 Suzuki Grand Vitara

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside and nearside sills corroded but not within prescribed areas

Front Both front body mountings corroded

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Headlamp lens slightly defective Both slightly misted (4.1.1 (b) (i))

Front Both front body mountings corroded

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Headlamp lens slightly defective Both slightly misted (4.1.1 (b) (i))

Obligatory mirror insecure (3.3 (b) (ii))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

both front body mounts corroded badly but no movement

both headlamp lenses faded

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Registration plate inscription illegible towbar blocking reg (0.1 (b))

both front body mounts corroded badly but no movement

both headlamp lenses faded

off side and near side front tyres worn close to limits

corrosion to front of near side inner sill / floor area

front tyres wearing low

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

corrosion to front of near side inner sill / floor area

front tyres wearing low

Nearside Play in steering rack inner joint(s) ()

Offside Play in steering rack inner joint(s) ()

Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Inner Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Lower Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Lower Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

centre exhaust box deteriorated

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim too low (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Lower Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

centre exhaust box deteriorated

Inspection of outer sills restricted by fitted plastic covers

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Oil leak

Rear silencer starting to deteriorate

Inspection of outer sills restricted by fitted plastic covers

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Oil leak

Rear silencer starting to deteriorate

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

centre silencer starting to deteriorate

inspection of outer sills restricted by plastic covers

Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

nearside rear tyre worn to 3mm

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)